Datasheet

Network Analysis Module (NM-NAM)
Information About the Network Analysis Module (NM-NAM)
8
Cisco IOS Release: Multiple releases (see the Feature History Table)
Sample Operating Topologies
In each of the following topologies, the router’s LAN interface is monitored through the external NAM
interface, and the router’s WAN interface is monitored through the internal NAM interface:
• NAM Management Interface Is Internal and Analysis-Module Interface Is Assigned an IP Address,
page 8
• NAM Management Interface Is Internal and Analysis-Module Interface Is IP Unnumbered, page 9
• NAM Management Interface Is External and Analysis-Module Interface Is IP Unnumbered, page 10
To see sample configurations for the following topologies, see the “Configuration Examples for the
Network Analysis Module (NM-NAM)” section on page 47.
NAM Management Interface Is Internal and Analysis-Module Interface Is Assigned an IP Address
Figure 3 shows a sample topology, in which:
• The internal NAM interface is used for management traffic.
• IP addresses from the same routable subnet are assigned to the Analysis-Module interface and the
NAM system.
Figure 3 Sample Topology: NAM Management Interface Is Internal and Analysis-Module Interface
Is Assigned an IP Address
Figure 3
Callout Interface Location
1 Analysis-Module interface Router internal
2 Internal NAM interface (management) NM-NAM internal
3 External NAM interface NM-NAM faceplate