Datasheet
Network Analysis Module (NM-NAM)
How to Configure and Manage the Network Analysis Module (NM-NAM)
46
Cisco IOS Release: Multiple releases (see the Feature History Table)
Main menu
1 - Download application image and write to HDD
2 - Download application image and reformat HDD
3 - Download bootloader and write to flash
4 - Download helper and write to flash
5 - Display software versions
6 - Reset application image CLI passwords to default
7 - Change file transfer method (currently ftp/http)
8 - Show upgrade log
9 - Send Ping
r - Exit and reset Services Engine
h - Exit and shutdown Services Engine
Selection [123456789rh]: 1
-----
Download NAM application image via ftp and write to HDD
URL of application image []: ftp://172.20.98.136/dir1/dir2/nam-image.bin.gz
Getting c6svc-nam.mainline-DAILY_20030825.bin.gz from 171.69.17.19 via ftp.
ftp://172.20.98.136/dir1/dir2/nam-image.bin.gz
(46389K)
- [########################] 46389K | 7421.38K/s
47502347 bytes transferred in 6.25 sec (7421.14k/sec)
upgrade.bin size:48241545
File transfer successful.
Checking upgrade.bin
Do you want to proceed installing it? [y/N] y
.
<debug output omitted>
.
Application image upgrade complete. You can boot the image now.
==============================================================================
Cisco Systems, Inc.
Services engine helper utility for NM-NAM
Version 1.1(1) [200311111641]
-----
Main menu
1 - Download application image and write to HDD
2 - Download application image and reformat HDD
3 - Download bootloader and write to flash
4 - Download helper and write to flash
5 - Display software versions
6 - Reset application image CLI passwords to default
7 - Change file transfer method (currently ftp/http)
8 - Show upgrade log
9 - Send Ping
r - Exit and reset Services Engine
h - Exit and shutdown Services Engine
Selection [123456789rh]: r
About to exit and reset Services Engine.
Are you sure? [y/N] y
Troubleshooting Tips
If you have trouble opening a NAM console session from the router, make sure that the NAM console
line is clear by entering the service-module analysis-module slot/0 session clear command in
privileged EXEC mode.