Datasheet

Network Analysis Module (NM-NAM)
How to Configure and Manage the Network Analysis Module (NM-NAM)
44
Cisco IOS Release: Multiple releases (see the Feature History Table)
Examples
This section provides the following examples:
• Upgrading the NAM Software—Patch: Example, page 44
• Upgrading the NAM Software—Full Image: Example, page 45
Upgrading the NAM Software—Patch: Example
Router> enable
Password: <password>
Router#
Router# service-module analysis-Module 1/0 session
Trying 172.20.104.86, 2033 ... Open
Cisco Network Analysis Module (NM-NAM)
nam1.cisco.com login: root
Password: <password>
Terminal type:vt100
Cisco Network Analysis Module (NM-NAM) Console, 3.2(0.10)
Copyright (c) 1999-2003 by cisco Systems, Inc.
WARNING! Default password has not been changed!
[e-mail]# patch
ftp://person@examplehost/dir/subdir/nam-app.3-2.cryptoK9.patch.1-0.bin
Proceeding with installation. Please do not interrupt.
If installation is interrupted, please try again.
Downloading nam-app.3-2.cryptoK9.patch.1-0.bin. Please wait...
Password for person@examplehost: <mypwd>
ftp://person@examplehost/dir/subdir/nam-app.3-2.cryptoK9.patch.1-0.bin
(1K)
/usr/local/nam/patch/wor [########################] 1K | 104.43K/s
1894 bytes transferred in 0.02 sec (102.35k/sec)
Verifying nam-app.3-2.cryptoK9.patch.1-0.bin. Please wait...
Patch nam-app.3-2.cryptoK9.patch.1-0.bin verified.
Step 7
y
Example:
Do you want to proceed installing it? [y/N] y
Confirms that you want to install the specified NAM
software image.
Step 8
r
Example:
Selection [12345678rh]:r
Selects the menu option to exit the helper and reset the
NAM.
Step 9
y
Example:
About to exit and reset Services Engine.
Are you sure? [y/N] y
Confirms that you want to exit the helper and reset the
NAM.
• This time, ignore the prompt to enter ***.
Command or Action Purpose