Datasheet

Network Analysis Module (NM-NAM)
How to Configure and Manage the Network Analysis Module (NM-NAM)
39
Cisco IOS Release: Multiple releases (see the Feature History Table)
SUMMARY STEPS
1. telnet {ip-address | hostname}
or
ssh {ip-address | hostname}
2. At the login prompt, enter root.
3. At the password prompt, enter your password.
or
If you have not changed the password from the factory-set default, enter root as the root password.
4. Perform the tasks that you need to perform in the NAM CLI. When you want to end the Telnet or
SSH session to the NAM and return to the Cisco IOS CLI, complete Step 5 and Step 6.
5. exit
6. logout
DETAILED STEPS
Command or Action Purpose
Step 1
telnet {ip-address | hostname}
or
ssh {ip-address | hostname}
Example:
Router# telnet 10.20.30.40
Example:
Router# ssh 10.20.30.40
Logs in to a host that supports Telnet.
or
Starts an encrypted session with a remote networking
device.
• Use the NAM system IP address or NAM system
hostname.
Step 2
At the login prompt, enter root.
Example:
login: root
Accesses the root (read/write) level of NAM.
Step 3
At the password prompt, enter your password.
or
If you have not changed the password from the
factory-set default, enter root as the root password.
Example:
Password: root
—
Step 4
Perform the tasks that you need to perform in the NAM
CLI. When you want to end the Telnet or SSH session
to the NAM and return to the Cisco IOS CLI, complete
Step 5 and Step 6.
For help using NAM CLI commands, see the “NAM CLI
Context-Sensitive Help” section on page 12.