Datasheet

Network Analysis Module (NM-NAM)
How to Configure and Manage the Network Analysis Module (NM-NAM)
19
Cisco IOS Release: Multiple releases (see the Feature History Table)
DETAILED STEPS
Command or Action Purpose
Step 1
enable
Example:
Router> enable
Enables privileged EXEC mode.
• Enter your password if prompted.
Step 2
service-module analysis-module slot/0 session
Example:
Router# service-module analysis-module 1/0
session
Example:
Router# service-module analysis-module 1/0
session clear
[confirm]
[OK]
Router# service-module analysis-module 1/0
session
Establishes a console session with the NAM.
• If you cannot open a NAM console session, make sure
that the NAM console line is clear by first entering the
service-module analysis-module slot/0 session clear
command in privileged EXEC mode.
Step 3
Press Return.
or
If a username prompt appears, then log in with your
AAA username and password.
Example:
Trying 10.1.1.1, 2065 ... Open
<Press Return>
Cisco Network Analysis Module (NM-NAM)
nam1.cisco.com login:
Example:
Trying 10.1.1.1, 2065... Open
User Access Verification
Username: myaaausername
Password: <myaaapassword>
Cisco Network Analysis Module (NM-NAM)
nam1.cisco.com login:
Activates the NAM console line.
or
Completes AAA login authentication and activates the
NAM console line.
• If AAA is configured on your router and you do not
want to log in twice to access the NAM console, then
complete the steps in the “Disabling AAA Login
Authentication on the NAM Console Line” section on
page 16.
Step 4
At the login prompt, enter root.
Example:
login: root
Accesses the root (read/write) level of NAM.