Technical data

2-3
Software Configuration Guide for the Cisco VG200
78-10322-02
Chapter 2 Basic Configuration
Cisco VG200 Port Numbering
• VIC-1FXO One-Port Voice/Fax Interface Card—FXO
• VIC-2FXO One-Port Voice/Fax Interface Card—FXO
• VIC-1E/M One-Port Voice/Fax Interface Card—E&M
• VIC-2E/M Two-Port Voice/Fax Interface Card—E&M
• VIC-1BRI-S/T-TE One-Port BRI Voice/Fax Interface Card
• VIC-2BRI-S/T-TE Two-Port BRI Voice/Fax Interface Card
Digital T1/E1 Voice Trunk Modules and Interface Cards
The T1/E1 voice trunk modules and voice interface cards available at this time for
the Cisco VG200 are as follows:
• VWIC-1MFT-T1 One-Port RJ-48 Multiflex Trunk—T1
• VWIC-2MFT-T1 Two-Port RJ-48 Multiflex Trunk—T1
• VWIC-2MFT-T1-D1 Two-Port RJ-48 Multiflex Trunk—T1 with Drop &
Insert support
• VWIC-1MFT-E1 One-Port RJ-48 Multiflex Trunk—E1
• VWIC-2MFT-E1 Two-Port RJ-48 Multiflex Trunk—E1
• VWIC-2MFT-E1-D1 Two-Port RJ-48 Multiflex Trunk—E1 with Drop &
Insert support
• NM-HDV-1T1-24 Single-Port 24-Channel T1 Voice/Fax Network Module
• NM-HDV-1T1-24E Single-Port 24-Enhanced Channel T1 Voice/Fax
Network Module
• NM-HDV-2T1-48 Single-Port 48-Channel T1 Voice/Fax Network Module
• NM-HDV-1E1-30 Single-Port 30-Channel E1 Voice/Fax Network Module
• NM-HDV-1E1-30E Single-Port 30-Enhanced Channel E1 Voice/Fax
Network Module
• NM-HDV-2E1-60 Single-Port 60-Channel E1 Voice/Fax Network Module