Technical data

2-13
Software Configuration Guide for the Cisco VG200
78-10322-02
Chapter 2 Basic Configuration
Voice Interface Configuration with the Intial Configuration Dialog
Table 2-2 ISDN Provisioning by Switch Type
Switch Type Provisioning
5ESS Custom BRI For voice
(Use these values only if you have an ISDN telephone
connected.)
2 B channels for voice
MultiPoint
Terminal type = D
2 directory numbers assigned by service provider
2 service profile identifiers (SPIDs) required, assigned by
service provider
MTERM = 2
Number of call appearances = 1
Display = No
Ringing/idle call appearances = idle
Autohold= no
Onetouch = no
Request delivery of calling line ID on Centrex lines
Set speed for ISDN calls to 56 kbps outside local
exchange
Directory number 1 can hunt to directory number 2