Technical data

2-11
Software Configuration Guide for the Cisco VG200
78-10322-02
Chapter 2 Basic Configuration
Voice Interface Configuration with the Intial Configuration Dialog
When you reach the following prompt on the System Configuration Dialog, enter
an ISDN switch type from Table 2-1:
BRI interface needs isdn switch-type to be configured
Valid switch types are:
[0] none..........Only if you don't want to configure BRI.
[1] basic-1tr6....1TR6 switch type for Germany
[2] basic-5ess....AT&T 5ESS switch type for the US/Canada
[3] basic-dms100..Northern DMS-100 switch type for
US/Canada
[4] basic-net3....NET3 switch type for UK and Europe
[5] basic-ni......National ISDN switch type
[6] basic-ts013...TS013 switch type for Australia
[7] ntt...........NTT switch type for Japan
[8] vn3...........VN3 and VN4 switch types for France
Choose ISDN BRI Switch Type [2]:
Do you want to configure BRI0/0 interface? [yes]:
Do you have a service profile identifiers (SPIDs) assigned? [no]: y
Enter SPID1: 12345
Enter SPID2: 12345
Note The setup command facility only prompts for the SPID number if
you specify basic-5ess, basic-ni1, or basic-dms100 for the switch
type.
ISDN BRI Line Configuration
Before using a Cisco VG200 with an ISDN BRI interface, you must order a
correctly configured ISDN BRI line from your local telecommunications service
provider.
North America basic-5ess AT&T basic rate switches
basic-dms100 NT DMS-100 basic rate switches
basic-ni1 National ISDN-1 switches
Table 2-1 ISDN Switch Types (continued)
Country ISDN Switch Type DescrIption