Datasheet

Data Sheet
© 2009 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information. Page 10 of 12
Feature Description
MTBF 1,825,192 hours
Table 11. VIC2-2BRI-NT/TE Specifications : 2-Port BRI Voice/Fax Interface Card (User or Network Side)
Feature Description
VIC2-2BRI-NT/TE Two-port BRI voice/fax interface card (user or network side)
Interface Type ISDN BRI
Cisco IOS Software Release 12.3(8)T
Cisco Part Number 800-21861-01
Compliance
●
FCC Part 68
●
CS03
●
CTR3
●
TS-031
●
JATE Green Book
Safety Conformance UL1950, CAN/CSA-C22.2, IEC 950, EN60950
Spare VIC2-2BRI-NT/TE=
ITU Compliance ITU-T Q.920, Q.921, Q.930, Q.931
Interface Four-wire user side S/T or network-side NT (software-configurable)
ISDN Digital Access BRI 2B+D
Physical Connector RJ-45
Number of Connectors/Ports Two
Phantom Power 30 mA at 40V maximum per port
MTBF 2,682,752 hours
VWIC2 Specifications
Table 12 shows the Cisco VWIC2 specifications.
Table 12. VWIC2 Specifications (Refer to “CISCO SECOND-GENERATION 1- AND 2-PORT T1/E1 MULTIFLEX TRUNK
VOICE/WAN INTERFACE CARDS” Data Sheet)
Cisco Product Number Description
VWIC2-1MFT-T1/E1 1-Port T1/E1 Multiflex Trunk Voice/WAN Interface Card
VWIC2-2MFT-T1/E1 2-Port T1/E1 Multiflex Trunk Voice/WAN Interface Card
VWIC2-1MFT-G703 1-Port G.703 Multiflex Trunk Voice/WAN Interface Card
VWIC2-2MFT-G703 2-Port G.703 Multiflex Trunk Voice/WAN Interface Card
CAB-E1-RJ45BNC E1 cable RJ-45 to dual BNC (unbalanced)
CAB-E1-RJ45TWIN E1 cable RJ-45 to Twinax (balanced)
Table 13. T1 Network Interface
Feature Description
Transmit Bit Rate 1.544 Mbps ± 50 bps/32 PPM
Receive Bit Rate 1.544 Mbps ± 50 bps/32 PPM
Line Code AMI, B8ZS
AMI Ones Density Enforced for N x 56 Kbps channels
Framing Format D4 (SF) and ESF
Output Level (LBO) 0, -7.5, or -15 dB
Input Level +1dB0 down to -24 dB0
Data Terminal Equipment (DTE)
Interface (WIC mode)
Fractional service