Datasheet

Connecting Cisco CEoIP Network Modules to the Network
Connecting 4-Port Serial Interface Network Modules to the Network
6
Connecting Cisco CEoIP Network Modules to the Network
Figure 4 Connecting the Cisco 12-in-1 Interface Cable to the 4-Port Serial Interface Network
Module (NM-CEM-4SER)
Using Cisco Extended 12-in-1 Interface Cables with the 4-Port Serial Interface
Network Module (NM-CEM-4SER)
Table 4 lists the Cisco Extended 12-in-1 interface cables supported by the 4-port serial interface network
module. Use the cable part number to order replacement or spare cables for the interface and DTE or
DCE mode appropriate for your network.
Figure 5 illustrates how to connect the Cisco 12-in-1 cable to the network module.
AL
EN
NM-CEM-4SER
See Manual before installation.
Connectors for Extended
Control Signals
CEM 3
CEM 1
CEM 2
CEM 0
ACT LP
LP ACT
88994
EIA/TIA-449 V.35
Connections at the CPE
EIA/TIA-232
EIA-530
EIA-530A
X.21