Datasheet

Cisco NM-8AM-V2 and NM-16AM-V2 Analog Modem Network Modules with V.92
Information About Cisco NM-8AM-V2 and NM-16AM-V2 Network Modules
4
Book Title
Chat Script
The Cisco NM-8AM-V2 and NM-16AM-V2 network modules support chat script like other Cisco
modem modules. There is no need to put a factory reset parameter in the chat script because this will
interfere with the modem settings configured internally by the Cisco NM-xAM-V2 firmware. If a factory
reset parameter is included, the parameter may interfere with how the connection speed is collected and
the modem may be unreliable in any reports on the speed.
When using the AT&F reset parameter in a chat-script with Cisco NM-8AM-V2 and NM-16AM-V2
network modules, the reset parameter should be used in conjunction with the connect string setting. For
example:
AT&F\\v1s0=1
This setting gives a factory reset, a long connect string, and answers after one ring. For more
information, refer to the documentation at:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/122cgcr/fdial_c/fnsprt2/dafmchat.ht
m