Specifications

CHAPTER
Send document comments to [e-mail].
13-1
Cisco Nexus 3000 Series NX-OS Unicast Routing Configuration Guide, Release 5.0(3)U2(2)
OL-25782-02
13
Configuring Route Policy Manager
This chapter describes how to configure the Route Policy Manager on the Cisco NX-OS switch.
This chapter includes the following sections:
• Information About Route Policy Manager, page 13-1
• Licensing Requirements for Route Policy Manager, page 13-5
• Guidelines and Limitations, page 13-5
• Default Settings, page 13-5
• Configuring Route Policy Manager, page 13-6
• Verifying the Route Policy Manager Configuration, page 13-17
• Configuration Examples for Route Policy Manager, page 13-17
• Related Topics, page 13-18
• Additional References, page 13-18
• Feature History for Route Policy Manager, page 13-18
Information About Route Policy Manager
Route Policy Manager supports route maps and IP prefix lists. These features are used for route
redistribution. A prefix list contains one or more IPv4 network prefixes and the associated prefix length
values. You can use a prefix list by itself in features such as Border Gateway Protocol (BGP) templates,
route filtering, or redistribution of routes that are exchanged between routing domains.
Route maps can apply to both routes and IP packets. Route filtering and redistribution pass a route
through a route map.
This section includes the following topics:
• Prefix Lists, page 13-2
• Route Maps, page 13-2
• Route Redistribution and Route Maps, page 13-5