Specifications

Send document comments to [e-mail].
7-14
Cisco Nexus 3000 Series NX-OS Unicast Routing Configuration Guide, Release 5.0(3)U2(2)
OL-25782-02
Chapter 7 Configuring Bidirectional Forwarding Detection for BGP
Verifying the BFD Configuration
Verifying the BFD Configuration
To display BFD configuration information, perform one of the following tasks:
For detailed information about the fields in the output from these commands, see the Cisco Nexus 7000
Series NX-OS Interfaces Command Reference, Release 5.x.
Monitoring BFD
Use the following commands to display BFD:
For detailed information about the fields in the output from these commands, see the Cisco Nexus 3000
Series Command Reference,.
Step 5
show running-config bgp
Example:
switch(config-router-neighbor)# show
running-config bgp
(Optional) Displays the BGP running configuration.
Step 6
copy running-config startup-config
Example:
switch(config-router-neighbor)# copy
running-config startup-config
(Optional) Saves this configuration change.
Command Purpose
Command Purpose
show running-config bfd Displays the running BFD configuration.
show startup-config bfd Displays the BFD configuration that will be
applied on the next system startup.
Command Purpose
show bfd neighbors [application name]
[details]
Displays information about BFD for a supported
application, such as BGP.
show bfd neighbors [interface int-if] [details] Displays information about BGP sessions on an
interface.
show bfd neighbors [dest-ip ip-address] [src-ip
ip-address][details]
Displays information about the specified BGP
session on an interface.
show bfd neighbors [vrf vrf-name] [details] Displays information about BFD for a VRF.