Specifications

Send document comments to [e-mail].
xix
Cisco Nexus 3000 Series NX-OS Unicast Routing Configuration Guide, Release 5.0(3)U2(2)
OL-25782-02
New and Changed Information
This chapter provides release-specific information for each new and changed feature in the Cisco Nexus
3000 Series NX-OS Unicast Routing Configuration Guide, Release 5.0(3)U2(2). The latest version of
this document is available at the following Cisco website:
http://www.cisco.com/en/US/products/ps11541/products_installation_and_configuration_guides_list.h
tml
To check for additional information, see the Cisco Nexus 7000 Series NX-OS Release Notes, Release 5.x
available at the following Cisco website:
http://www.cisco.com/en/US/products/ps11541/prod_release_notes_list.html
Table 1 summarizes the new and changed features for the Cisco Nexus 3000 Series NX-OS Unicast
Routing Configuration Guide, Release 5.0(3)U2(2), and tells you where they are documented.
Table 1 New and Changed Features for 5.0(3)
Feature Description
Changed in
Release Where Documented
IPv4 Added information to configure the glean
throttling feature.
5.0(3)U2(1) Chapter 2, “Configuring IPv4”
Bidirectional forwarding
detection (BFD) for BGP
Added information on how to configure BFD
for BGP.
5.0(3)U2(2) Chapter 7, “Configuring
Bidirectional Forwarding
Detection for BGP”
Equal-cost multipathing
(ECMP) protocol for host
routes
Added information on how to configure
ECMP for host routes.
5.0(3)U2(2) Chapter 8, “Configuring ECMP
for Host Routes”
BGP Added support for Local AS. 5.0(3)U2(2a) Configuring Local AS Support,
page 6-24
BFD for BGP Added guidelines and limitations for LACP
configuration, and for BFD echo and URFP.
5.0(3)U2(2a) Guidelines and Limitations,
page 7-3