Specifications

Send document comments to [e-mail].
4-27
Cisco Nexus 3000 Series NX-OS Unicast Routing Configuration Guide, Release 5.0(3)U2(2)
OL-25782-02
Chapter 4 Configuring EIGRP
Verifying the EIGRP Configuration
This example shows how to create a VRF and add an interface to the VRF:
switch# configure terminal
switch(config)# vrf context NewVRF
switch(config-vrf)# router eigrp Test1
switch(config-router)# interface ethernet 1/2
switch(config-if)# no switchport
switch(config-if)# ip router eigrp Test1
switch(config-if)# vrf member NewVRF
switch(config-if)# copy running-config startup-config
Verifying the EIGRP Configuration
To display the EIGRP configuration information, perform one of the following tasks:
Displaying EIGRP Statistics
To display EIGRP statistics, use the following commands:
Command Purpose
show ip eigrp [instance-tag] Displays a summary of the configured EIGRP processes.
show ip eigrp [instance-tag] interfaces
[type number] [brief] [detail]
Displays information about all configured EIGRP
interfaces.
show ip eigrp instance-tag neighbors [type
number]
Displays information about all the EIGRP neighbors. Use
this command to verify the EIGRP neighbor
configuration.
show ip eigrp [instance-tag] route
[ip-prefix/length] [active] [all-links]
[detail-links] [pending] [summary]
[zero-successors] [vrf vrf-name]
Displays information about all the EIGRP routes.
show ip eigrp [instance-tag] topology
[ip-prefix/length] [active] [all-links]
[detail-links] [pending] [summary]
[zero-successors] [vrf vrf-name]
Displays information about the EIGRP topology table.
show running-configuration eigrp Displays the current running EIGRP configuration.
Command Purpose
show ip eigrp [instance-tag] accounting
[vrf vrf-name]
Displays accounting statistics for EIGRP.
show ip eigrp [instance-tag] route-map
statistics redistribute
Displays redistribution statistics for EIGRP.
show ip eigrp [instance-tag] traffic [vrf
vrf-name]
Displays traffic statistics for EIGRP.