Specifications

Send document comments to [e-mail].
4-11
Cisco Nexus 3000 Series NX-OS Unicast Routing Configuration Guide, Release 5.0(3)U2(2)
OL-25782-02
Chapter 4 Configuring EIGRP
Configuring Basic EIGRP
10. (Optional) copy running-config startup-config
DETAILED STEPS
Command Purpose
Step 1
configure terminal
Example:
switch# configure terminal
switch(config)#
Enters configuration mode.
Step 2
router eigrp instance-tag
Example:
switch(config)# router eigrp Test1
switch(config-router)#
Creates a new EIGRP process with the configured
instance tag. The instance tag can be any
case-sensitive, alphanumeric string up to 20
characters.
If you configure an instance-tag that does not qualify
as an AS number, you must use the
autonomous-system command to configure the AS
number explicitly or this EIGRP instance will remain
in the shutdown state.
Step 3
autonomous-system as-number
Example:
switch(config-router)# autonomous-system
33
(Optional) Configures a unique AS number for this
EIGRP instance. The range is from 1 to 65535.
Step 4
log-adjacency-changes
Example:
switch(config-router)#
log-adjacency-changes
(Optional). Generates a system message whenever an
adjacency changes state. This command is enabled by
default.
Step 5
log-neighbor-warnings [seconds]
Example:
switch(config-router)#
log-neighbor-warnings
(Optional) Generates a system message whenever a
neighbor warning occurs. You can configure the time
between warning messages, from 1 to 65535, in
seconds. The default is 10 seconds. This command is
enabled by default.
Step 6
interface interface-type slot/port
Example:
switch(config-router)# interface
ethernet 1/2
switch(config-if)#
Enters interface configuration mode. Use ? to
determine the slot and port ranges.
Step 7
no switchport
Example:
switch(config-if)# no switchport
Configures the interface as a Layer 3 routed interface.
Step 8
ip router eigrp instance-tag
Example:
switch(config-if)# ip router eigrp Test1
Associates this interface with the configured EIGRP
process. The instance tag can be any case-sensitive,
alphanumeric string up to 20 characters.