Specifications

© 2006 Cisco Systems, Inc.
All rights reserved.
Product Features 2-53
NAM / Traffic Analyzer v3.5 Tutorial
© 2006 Cisco Systems, Inc. All rights reserved.
Product Features 2-53
NAM / Traffic Analyzer v3.5 Tutorial
Getting Started
Setting NAM System Time
Getting Started
Setting NAM System Time
Configure the NAM system
time to either synchronize with
the time set on the host switch
or configure the NAM to set its
time based on an NTP server.
Configure the NAM system
time to either synchronize with
the time set on the host switch
or configure the NAM to set its
time based on an NTP server.
Setting NAM System Time
Before setting the NAM up for monitoring and reviewing the results, it should be noted that most analysis of
the data reported by the NAM will often be dependent upon then time the events reported occurred.
Therefore it is important that the time of the NAM is properly set. The system time of the NAM can be either
synchronized with the time set on the host device or can be retrieved and set from an NTP server responsible
for setting the time on all network devices.