Specifications

© 2006 Cisco Systems, Inc.
All rights reserved.
System Admin 4-11
NAM / Traffic Analyzer v3.5 Tutorial
© 2006 Cisco Systems, Inc. All rights reserved.
Sys tem Admin 4-11
NAM / Traffic Analyzer v3.5 Tutorial
NAM-1, NAM-2 Administration
Initial Configuration – IP Settings
NAM-1, NAM-2 Administration
Initial Configuration – IP Settings
Console> (enable) session mod_num --- CatOS
Console> (enable) session slot slot_num processor 1 --- IOS
Root@localhost#
ip address ip-address subnet-mask
ip broadcast broadcast-address
ip host name
ip gateway default-gateway
ip domain domain-name
ip nameserver ip-address [ip-address]
Configuring Initial Setup (NAM-1, NAM-2) – IP Settings, continue …
To configure the IP address and subnet mask, enter:
root@localhost# ip address ip-address subnet-mask
To configure the IP broadcast address, enter:
root@localhost# ip broadcast broadcast-address
To configure the IP host name used in the CLI prompt, show commands, and log messages, enter:
[e-mail]# ip host [host-name]
To configure the default gateway, enter:
[e-mail]# ip gateway default-gateway
To configure the domain name for the NAM, enter:
root@localhost# ip domain domain-name
Optionally, configure one or more IP addresses as DNS name servers. This step is optional but highly
recommended. Unexpected delays can occur if a name server is not set. To configure, enter:
[e-mail]# ip nameserver ip-address
Verify the NAM IP configuration by entering:
[e-mail]# show ip