Specifications

© 2006 Cisco Systems, Inc.
All rights reserved.
Scenarios 3-61
NAM / Traffic Analyzer v3.5 Tutorial
© 2006 Cisco Systems, Inc. All rights reserved.
Scenarios 3-61
NAM / Traffic Analyzer v3.5 Tutorial
Scenario 5
Create Top N Reports
Scenario 5
Create Top N Reports
Reports > Basic Reports
Top N Reports:
• Applications
• Hosts
• Conversations
• Ports (NAM-1/2)
• Interfaces (NM-NAM)
• MPLS (NAM-1/2)
Top N Reports:
• Applications
• Hosts
• Conversations
• Ports (NAM-1/2)
• Interfaces (NM-NAM)
• MPLS (NAM-1/2)
Default Name
Default Name
Choose the
appropriate Data
Source
Choose the
appropriate Data
Source
Create Top N Reports
The WAN link is an important asset for Q-bits and Dean wants to track general application usage across it.
Rather than create a basic report for each application, Dean can create a basic report to display the top
applications over the selected time period. Dean uses the following steps to create a basic historical report
to help him trend the Top applications over time on the WAN link (earlier Dean used CEF to forward the
WAN packets to the internal NM-NAM interface):
Step 1. Select Reports > Basic Reports. A list of all the currently created basic reports and their
status will be displayed. Dean’s list is empty since he hasn’t created any yet.
Step 2. Select the Create button. The Select Report Type dialog is displayed (first screen of a two part
wizard).
Step 3. Select Applications report type and click the Next> button. The Setup Report Parameters
dialog is displayed (step two of the wizard).
Step 4. Select the Top N Applications radio button. Dean decides to use the default report name,
chooses Bytes/Sec as the value to log and graph, the default logging interval of 15 minutes,
and selects Internal as the Data Source. Click the Finish button to create the report.