Specifications

Scenarios 3-47

NAM / Traffic Analyzer v3.5 Tutorial

Scenarios 3-47

NAM / Traffic Analyzer v3.5 Tutorial

Scenario 4

Enable VoIP Monitoring

Scenario 4

Enable VoIP Monitoring

VoIP monitoring is

enabled for all traffic and

not by individual VLANs

VoIP monitoring is

enabled for all traffic and

not by individual VLANs

Enable

Setup > Monitor > Voice Monitoring

Enable VoIP Monitoring

Like all other NAM monitoring features, voice monitoring must be enabled before any data collection will take

place. Enabling voice monitoring differs from enabling the other monitoring features because voice is either

enabled or not, whereas other collections are enabled on a per-data source basis.

To enable voice monitoring, Dean does the following:

Step 1. Select Setup > Monitor > Voice Monitoring. The Voice Monitor Setup screen is displayed.

Step 2. Voice monitoring on the NAM is performed by decoding the information found in SCCP, H.323

MGCP, or SIP control messages. To enable any of them, simply check the appropriate

Monitoring Enabled checkbox. You can also decide on the number of entries in the various

voice reports to help conserve NAM resources.

Step 3. Click Apply to begin voice monitoring activities.

Note: For advanced troubleshooting, the Debug checkbox can be selected to include calls in all phases,

including call setup.

Dean is now ready to look at the voice services that Q-Bits converged network offers.