Specifications

© 2006 Cisco Systems, Inc.
All rights reserved.
Scenarios 3-29
NAM / Traffic Analyzer v3.5 Tutorial
© 2006 Cisco Systems, Inc. All rights reserved.
Scenarios 3-29
NAM / Traffic Analyzer v3.5 Tutorial
Scenario 2
Quick Capture Settings Review
Scenario 2
Quick Capture Settings Review
Buffer Status
Buffer Status
Buffer
Parameters
Buffer
Parameters
Filter by Address
Filter by Address
Capture > Buffers
Automatically created buffer
Automatically created buffer
Settings
automatically
filled in by Quick
Capture
Settings
automatically
filled in by Quick
Capture
Available buffer space
Available buffer space
Buffer Controls
Buffer Controls
Reviewing the Data Capture Setup
Before looking at the decode of the captured packets that is immediately displayed, let’s take a quick look at
the buffer that was automatically setup. The buffer parameters dialog is also used for controlling the capture.
To review the automatically created buffer:
Step 1. Click Capture > Buffers. The list of Buffers is displayed.
Step 2. Locate the desired buffer (name of buffer in this case will be Host_IP_Address). Click Settings.
The Capture Settings dialog is displayed.
Note: The filter settings were automatically set to collect all packets to/from this host.
Dean now looks at the decoded packets to try and figure out what the tcp-unknown traffic is.