Specifications

© 2006 Cisco Systems, Inc.
All rights reserved.
Product Features 2-158
NAM / Traffic Analyzer v3.5 Tutorial
© 2006 Cisco Systems, Inc. All rights reserved.
Product Features 2-158
NAM / Traffic Analyzer v3.5 Tutorial
Packet Capture and Decode
Quick Capture
Packet Capture and Decode
Quick Capture
Monitor > Conversations
• From a monitor report, selecting a table entry
and the Capture button automatically sets up
a data capture using the table entry to fill in
the capture settings.
• Note: Capture is immediately started and
decode results are displayed.
• From a monitor report, selecting a table entry
and the Capture button automatically sets up
a data capture using the table entry to fill in
the capture settings.
• Note: Capture is immediately started and
decode results are displayed.
Auto-name
Auto-name
Quick Capture
The NAM Traffic Analyzer software allows for a shortcut to reduce the time and effort required in setting up a
data capture. During typical review of monitor reports, you may come across an entry that you determine
requires more in-depth analysis using data capture. Rather than going to the Capture > Settings dialog and
hoping you remembered all the pertinent information to set up the capture filters, you can simply select the
entry in the monitor report table and click the Capture button. This action sets up a data capture using the
data in the table entry as the filter values. The collection is immediately started and the user is shown the
decode screen of the packets captured so far.