Specifications
© 2006 Cisco Systems, Inc.
All rights reserved.
Product Features 2-151
NAM / Traffic Analyzer v3.5 Tutorial
© 2006 Cisco Systems, Inc. All rights reserved.
Product Features 2-151
NAM / Traffic Analyzer v3.5 Tutorial
Viewing Alarm Logs
NAM Thresholds
Viewing Alarm Logs
NAM Thresholds
Display alarms
generated by the NAM
Display alarms
generated by the NAM
Viewing NAM Threshold Alarms
Under the Traffic Analyzer Alarm tab, you can view all the alarms that both the NAM and the Cisco Catalyst
®
Switch have generated. Remember, however, that alarms will appear only if you have first configured them
under Setup > Alarms. Upon choosing the Alarm tab, you will be presented with two options:
• NAM, a link for displaying alarms generated by the NAM
• Switch, a link for displaying alarms generated by the Cisco Catalyst Switch (NAM-1/2)
This illustration shows the NAM’s Alarm list with two alarms related to “Too many SNMP packets” as
configured by the user. According to the description entered by the user, “too many SNMP packets” means
greater than a 1000 in 30 seconds. As can be seen, the alarm was triggered because 1846 packets were
seen in the 60 second interval. Notice that providing a good description can help you quickly determine the
reason for the alarm. Use the Clear button to clear the table of alarms.