Specifications

© 2006 Cisco Systems, Inc.
All rights reserved.
Product Features 2-78
NAM / Traffic Analyzer v3.5 Tutorial
© 2006 Cisco Systems, Inc. All rights reserved.
Product Features 2-78
NAM / Traffic Analyzer v3.5 Tutorial
Basic NM-NAM Configuration
Host Interface
Basic NM-NAM Configuration
Host Interface
When local Interfaces are enabled
to be monitored, the NM-NAM will
automatically interact with the
router to:
• Enable NetFlow Data Export
(NDE) on the router Interfaces
• Set itself as the destination for
NDE
Provides App, Host, and Conv data
with no further set-up
When local Interfaces are enabled
to be monitored, the NM-NAM will
automatically interact with the
router to:
• Enable NetFlow Data Export
(NDE) on the router Interfaces
• Set itself as the destination for
NDE
Provides App, Host, and Conv data
with no further set-up
Host Interface
The NM-NAM will provide basic layer 2 statistics for each interface of the host device using MIB-II variables.
To get further analysis of the traffic on any interface one could use CEF to forward the traffic to the NM-NAM
or use the NM-NAM interfaces feature. When using this feature, Setup > Data Sources > Interfaces, the
administrator is provided with a list of all interfaces discovered on the host device. By enabling desired
interfaces, the NM-NAM enables NetFlow export on those interfaces and sets itself as the destination. As will
be seen later on, the user can then see app, host, and conv statistics for each enabled interface using the
Monitor > Router > Interfaces report.