Specifications

© 2006 Cisco Systems, Inc.
All rights reserved.
Product Features 2-68
NAM / Traffic Analyzer v3.5 Tutorial
© 2006 Cisco Systems, Inc. All rights reserved.
Product Features 2-68
NAM / Traffic Analyzer v3.5 Tutorial
Basic NAM Configuration
Defining NetFlow Devices
Basic NAM Configuration
Defining NetFlow Devices
To create an NDE data
source, the device must be
added to the NAM NetFlow
table
To create an NDE data
source, the device must be
added to the NAM NetFlow
table
Test connectivity of device
Test connectivity of device
Same for NAM-1, NAM-
2, and NM-NAM
Same for NAM-1, NAM-
2, and NM-NAM
NetFlow Devices
Besides adding devices from the Listening Mode window, devices can be added/edited/deleted at any time
using the Setup > Data Sources > NetFlow > Devices task. Additionally, if monitoring reports are not
showing any data, first refer to this list and highlight the suspect device and click the Test button to verify
connectivity.
Once the device is added, the NAM creates a default NDE data source for all the flows from this device. Next
let’s discuss how to create an NDE data source that is specific to certain interfaces on the device.