Datasheet

© 2014 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 19 of 29
Modular QoS CLI (MQC) compliance - IPv4 and IPv6
ACL-based QoS classification (Layers 2, 3, and 4)
MQC CoS marking
Per-port virtual output queuing
CoS-based egress queuing
Egress strict-priority queuing
Egress port-based scheduling: Weighted Round-Robin (WRR)
Control Plan Policing (CoPP) - IPv4 and IPv6
Security
Ingress ACLs (standard and extended) on Ethernet and virtual Ethernet ports
Standard and extended Layer 2 ACLs: MAC addresses, protocol type, etc.
Standard and extended Layer 3 to 4 ACLs: IPv4 and IPv6, Internet Control Message Protocol (ICMP and ICMPv6), TCP, User Datagram
Protocol (UDP), etc.
VLAN-based ACLs (VACLs)
Port-based ACLs (PACLs)
Named ACLs
Optimized ACL distribution
ACLs on virtual terminals (VTYs)
ACL logging on management interface
Dynamic Host Configuration Protocol (DHCP) snooping with Option 82
Dynamic Address Resolution Protocol (ARP) Inspection
IP source guard
DHCP relay
Cisco CTS (Authentication and Policy download from ACS)
Ethernet Port Security
IPv6 RACL
IPv6 PACL
IPv6 VACL
High-Availability Features
In-Service Software Upgrade (ISSU) for Layer 2
Hot-swappable field-replaceable power supplies, fan modules, and expansion modules
1:1 power redundancy
N:1 fan module redundancy
Management
Switch management using 10/100/1000-Mbps management or console ports
CLI-based console to provide detailed out-of-band management
In-band switch management
Locator and beacon LEDs on Cisco Nexus 2000 Series
Port-based locator and beacon LEDs
Configuration synchronization
Module preprovisioning
Configuration rollback
Secure Shell Version 2 (SSHv2)
Telnet
AAA
AAA with RBAC
RADIUS
TACACS+
Syslog (8 servers)
Embedded packet analyzer
SNMPv1, v2, and v3 (IPv4 & IPv6)
Enhanced SNMP MIB support
XML (NETCONF) support
Remote monitoring (RMON)
Advanced Encryption Standard (AES) for management traffic
Unified username and passwords across CLI and SNMP