Datasheet
Data Sheet
© 2011 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 3 of 22
Figure 3. Layer 3 Daughter Card on the Cisco Nexus 5548UP Switch
Cisco Nexus 5548UP Switch
The Cisco Nexus 5548UP is a 1RU 10 Gigabit Ethernet, Fibre Channel, and FCoE switch offering up to 960 Gbps of
throughput and up to 48 ports. The switch has 32 unified ports and one expansion slot.
Expansion Module Options for the Cisco Nexus 5548UP
The Cisco Nexus 5500 platform is equipped with expansion modules that can be used to increase the number of 10
Gigabit Ethernet and FCoE ports or to connect to Fibre Channel SANs with 8/4/2/1-Gbps Fibre Channel switch ports,
or both.
The Cisco Nexus 5548UP supports one expansion module from the following offerings (Figure 4):
●
Ethernet module that provides sixteen 1 and 10 Gigabit Ethernet and FCoE ports using the SFP+ interface
●
Fibre Channel plus Ethernet module that provides eight 1 and 10 Gigabit Ethernet and FCoE ports using the
SFP+ interface, and eight ports of 8/4/2/1-Gbps native Fibre Channel connectivity using the SFP+/SFP
interface
●
A unified port module that provides up to sixteen 1 and 10 Gigabit Ethernet and FCoE ports using the SFP+
interface or up to 16 ports of 8/4/2/1-Gbps native Fibre Channel connectivity using the SFP+/SFP interface.
The use of 1 and 10 Gigabit Ethernet or 8/4/2/1-Gbps Fibre Channel on a port is mutually exclusive but
selectable for any of the 16 physical ports per module.
Figure 4. From Left to Right: 16-Port 1 and 10 Gigabit Ethernet and FCoE Module, 8-Port Fibre Channel plus 8-Port 1 and 10
Gigabit Ethernet and FCoE Module, and Unified Port Module
In addition to these expansion modules, the Cisco Nexus 5548UP supports a Layer 3 daughter card that can be
ordered with the system or as a spare (field upgradable). This daughter card provides up to 160 Gbps of Layer 3
forwarding capability (240 mpps) that can be shared by all 48 ports in the chassis. Note that the Layer 3 daughter
card does not take up one of the expansion slots on the rear of the chassis, but instead is installed by replacing the
I/O module that is located on the front of the chassis.
Cisco Nexus 5596UP Switch
The Cisco Nexus 5596UP Switch (Figure 5) is a 2RU 10 Gigabit Ethernet, Fibre Channel, and FCoE switch offering
up to 1920 Gbps of throughput and up to 96 ports. The switch has 48 unified ports and three expansion slots.
Figure 5. Cisco Nexus 5596UP Switch Configured with Three 16-Port Expansion Modules