Installation manual

-417
Cisco MWR 2941 Mobile Wireless Edge Router Release 3.5 Command Reference, Cisco IOS Release 15.1(3)MR
OL-26895-01
Chapter Cisco MWR 2941 Router Command Reference, Release 15.1(3)MR
set cos-inner cos
Related Commands Command Description
bridge-domain Enables RFC 1483 ATM bridging or RFC 1490 Frame Relay bridging to map
a bridged virtual LAN (VLAN) to an ATM permanent virtual circuit (PVC)
or Frame Relay data-link connection identifier (DLCI).
class-map Creates a class map to be used for matching packets to a specified class.
policy-map Creates or modifies a policy map that can be attached to one or more
interfaces to specify a service policy.
class (policy-map) Specifies the name of the class whose policy you want to create or change,
and the default class (commonly known as the class-default class) before you
configure its policy.
service-policy Attaches a policy map to an input interface or virtual circuit (VC) or an
output interface or VC, to be used as the service policy for that interface or
VC.