Specifications

7-19
Cisco MWR 2941 Mobile Wireless Edge Router Release 3.5 Software Configuration Guide, Cisco IOS Release 15.1(3)MR
OL-26895-01
Chapter 7 Configuring VLANs
Configuring VLAN Trunks
Follow the same steps on Switch B to configure the trunk port for Trunk 1 with a path cost of 30 for
VLANs 2 through 4, and configure the trunk port for Trunk 2 with a path cost of 30 for VLANs 8 through
10.
Step 13
exit Return to global configuration mode.
Step 14
interface fastethernet0/2 Enter interface configuration mode for Trunk port 2.
Step 15
spanning-tree vlan 8-10 cost 30 Set the spanning-tree path cost to 30 for VLANs 2 through 4.
Step 16
exit Return to global configuration mode.
Step 17
Repeat Steps 9 through 11 on the other configured trunk interface on
Switch A, and set the spanning-tree path cost to 30 for VLANs 8, 9, and
10.
Step 18
exit Return to privileged EXEC mode.
Step 19
show running-config Verify your entries. In the display, verify that the path costs are set
correctly for both trunk interfaces.
Step 20
copy running-config startup-config (Optional) Save your entries in the configuration file.
Command Purpose