Specifications

29-3
Cisco MWR 2941 Mobile Wireless Edge Router Release 3.5 Software Configuration Guide, Cisco IOS Release 15.1(3)MR
OL-26895-01
Chapter 29 Monitoring and Managing the Cisco MWR 2941 Router
Configuring Network Management Features
• Inventory
• OSS Integration
• Security
• Client/Server Architecture
• Multiple OS Support
The Cisco MWTM integrates with any SNMP-based monitoring system, such as Cisco Info Center
products. In addition, the Cisco MWTM collects a large amount of performance data that can be
exported or directly accessed from the database. This data can then be used by performance reporting
applications. For more information about MWTM, see
http://www.cisco.com/en/US/products/ps6472/tsd_products_support_series_home.html.
Configuring SNMP Support
Use the following instructions to configure SNMP support: setting up the community access,
establishing a message queue for each trap host, enabling the router to send SNMP traps, enabling SNMP
traps for alarms, and enabling SNMP traps for a specific environment. You might also need to enter other
configuration commands, depending on the requirements for your system configuration and the
protocols you plan to route on the interface.
Note To view the current MIBs that the Cisco MWR 2941 supports, see the Release Notes for Cisco MWR
2941 Mobile Wireless Edge Router.
Note In the following procedure, press the Return key after each step unless otherwise noted. At any time,
you can exit the privileged level and return to the user level by entering disable at the Router# prompt.
To configure a Cisco MWR 2941 for SNMP, follow these steps while in the global configuration mode:
Command Purpose
Step 1
enable
Example:
Router> enable
Enables privileged EXEC mode.
• Enter your password if prompted.
Step 2
configure terminal
Example:
Router# configure terminal
Enters global configuration mode.