Specifications

23-39
Cisco MWR 2941 Mobile Wireless Edge Router Release 3.5 Software Configuration Guide, Cisco IOS Release 15.1(3)MR
OL-26895-01
Chapter 23 Configuring Pseudowire
Configuration Examples for Pseudowire
interface GigabitEthernet0/1
ip address 2.2.2.3 255.255.255.0
duplex auto
speed auto
mpls ip
!
interface ATM0/2
no ip address
scrambling-payload
ima-group 0
no ilmi-keepalive
!
interface ATM0/3
no ip address
scrambling-payload
ima-group 0
no ilmi-keepalive
!
ip route 88.88.88.88 255.255.255.255 2.2.2.2
!
!
ip http server
no ip http secure-server
!
!
mpls ldp router-id Loopback0
!
!
line con 0
exec-timeout 0 0
line aux 0
line vty 0 4
exec-timeout 0 0
password mypassword
login
!
network-clock-select 1 E1 0/0
!
end
Ethernet over MPLS Configuration
The following configuration example shows an Ethernet pseudowire (aka EoMPLS) configuration.
MWR_A
!
version 12.4
service timestamps debug datetime msec
Node-B
MWR_A
20.20.20.1/24 20.20.20.2/24
MWR_B
4.4.4.4 2.2.2.2
RNC
253095
GigabitEthernet0/1 GigabitEthernet0/1
VLAN1 VLAN1