Specifications

23-26
Cisco MWR 2941 Mobile Wireless Edge Router Release 3.5 Software Configuration Guide, Cisco IOS Release 15.1(3)MR
OL-26895-01
Chapter 23 Configuring Pseudowire
Configuration Examples for Pseudowire
!
!
line con 0
exec-timeout 0 0
line aux 0
line vty 0 4
exec-timeout 0 0
login
!
network-clock-select 1 BITS
!
end
PWE3 Redundancy Configuration
The following example shows a PWE3 Redundancy configuration (Figure 23-3).
Figure 23-3 PWE3 Redundancy Configuration
MWR_1
version 12.4
service timestamps debug datetime msec
service timestamps log datetime msec
!
hostname mwr-1
!
boot-start-marker
boot-end-marker
!
card type e1 0 1
card type e1 0 2
!
ip cef
!
controller E1 0/0
clock source internal
cem-group 0 unframed
!
controller E1 0/1
!
controller E1 0/2
!
controller E1 0/3
clock source internal
!
controller E1 1/0
mode atm
clock source internal
!
TDM
AT M
Ethernet
TDM (Primary)
TDM (Backup)
ATM (Primary)
ATM (Backup)
Ethernet (Primary)
Ethernet (Backup)
MWR_1
BTS/Node B
BSC/
RNC
MWR_2
9.9.9.6/24 9.9.9.8/24
253035
GigabitEthernet0/1
GigabitEthernet0/1