Specifications

23-18
Cisco MWR 2941 Mobile Wireless Edge Router Release 3.5 Software Configuration Guide, Cisco IOS Release 15.1(3)MR
OL-26895-01
Chapter 23 Configuring Pseudowire
Configuration Examples for Pseudowire
Note For more information about configuring VLANs on the Cisco MWR 2941, see the “Configuring
VLANs” section on page 7-1.
Configuration Examples for Pseudowire
The following sections contain full configuration examples for pseudowire connections.
• Asymmetric PWE3 Configuration, page 23-18
• PWE3 Redundancy Configuration, page 23-26
• TDM over MPLS Configuration, page 23-30
• ATM over MPLS Configuration, page 23-34
• Ethernet over MPLS Configuration, page 23-39
Asymmetric PWE3 Configuration
The following example shows an Asymmetric PWE3 configuration (Figure 23-2).
Figure 23-2 Asymmetric PWE3 Configuration
MWR_1
version 12.4
service timestamps debug datetime msec localtime
service timestamps log datetime msec localtime
!
hostname MWR1
!
boot-start-marker
boot-end-marker
!
card type e1 0 0
card type e1 0 1
!
!
ip cef
!
!
controller E1 0/0
clock source internal
cem-group 1 unframed
GE0/0 (Uplink)
GE0/1 (Downlink)
MWR_1
BTS/Node B
BSC/RNC
MWR_2
AT M
TDM
AT M
TDM
253034