Specifications

CHAPTER
21-1
Cisco MWR 2941 Mobile Wireless Edge Router Release 3.5 Software Configuration Guide, Cisco IOS Release 15.1(3)MR
OL-26895-01
21
Configuring Routing Protocols
In addition to static routing, the Cisco MWR 2941 supports the following routing protocols:
• OSPF—An Interior Gateway Protocol (IGP) designed expressly for IP networks that supports IP
subnetting and tagging of externally derived routing information. OSPF also allows packet
authentication and uses IP multicast when sending and receiving packets. For instructions on how
to configure OSPF, see the IP Routing: OSPF Configuration Guide, Cisco IOS Release 15.0S.
• IS-IS—An Open System Interconnection (OSI) protocol that specifies how routers communicate
with routers in different domains. For instructions on how to configure IS–IS, see the IP Routing:
ISIS Configuration Guide, Cisco IOS Release 15.0S.
• BGP—An interdomain routing protocol designed to provide loop-free routing between separate
routing domains that contain independent routing policies (autonomous systems). For instructions
on how to configure BGP, see the IP Routing: BGP Configuration Guide, Cisco IOS Release 15.0S.
Note For information about Bidirectional Forwarding Detection (BFD) including sample routing
configurations with BFD, see Chapter 22, “Configuring Bidirectional Forwarding Detection.”