Specifications

20-2
Cisco MWR 2941 Mobile Wireless Edge Router Release 3.5 Software Configuration Guide, Cisco IOS Release 15.1(3)MR
OL-26895-01
Chapter 20 Configuring IPv6
Supported IPv6 Commands
IPv6 Limitations
For information about IPv6 limitations Release Notes for Cisco MWR 2941-DC Mobile Wireless Edge
Router, Release 15.1(1)MR .
Supported IPv6 Commands
Table 2 summarizes the supported commands in Release 15.0(1)MR. For more information about these
commands, refer to the Cisco IOS IPv6 Command Reference.
Table 2 Supported IPv6 Commands
aaa new-model ipv6 ospf hello-interval show clock
address-family ipv6
bfd interval
clear cef table ipv6 ospf mtu-ignore show ipv6 cef
clear ipv6 dhcp binding ipv6 ospf name-lookup show ipv6 cef adjacency
clear ipv6 dhcp client ipv6 ospf neighbor show ipv6 cef non-recursive
clear ipv6 dhcp conflict ipv6 ospf network show ipv6 cef platform
clear ipv6 dhcp relay binding ipv6 ospf priority show ipv6 cef summary
clear ipv6 mtu ipv6 ospf retransmit-interval show ipv6 cef switching statistics
clear ipv6 neighbors ipv6 ospf transmit-delay show ipv6 cef traffic prefix-length
clear ipv6 route ipv6 prefix-list show ipv6 cef tree
clear ipv6 traffic ipv6 prefix-list sequence-number show ipv6 cef vrf
crypto key generate rsa ipv6 route show ipv6 dhcp
debug ipv6 cef drop ipv6 route static bfd show ipv6 dhcp binding
debug ipv6 cef events ipv6 router ospf show ipv6 dhcp conflict
debug ipv6 cef receive ipv6 source-route show ipv6 dhcp database
debug ipv6 cef table ipv6 unicast-routing show ipv6 dhcp interface
debug ipv6 dhcp match dscp show ipv6 dhcp pool
debug ipv6 dhcp database match protocol show ipv6 interface
debug ipv6 icmp match protocol (zone) show ipv6 mtu
debug ipv6 nd maximum-paths (IPv6) show ipv6 neighbors
debug ipv6 packet mpls ldp router-id show ipv6 ospf
hostname neighbor activate show ipv6 ospf border-routers
ip address neighbor ebgp-multihop show ipv6 ospf database
neighbor fall-over bfd
ip unnumbered neighbor remote-as show ipv6 ospf event
ipv6 address neighbor send-community show ipv6 ospf flood-list
ipv6 address anycast neighbor send-label show ipv6 ospf graceful-restart