Specifications

CHAPTER
20-1
Cisco MWR 2941 Mobile Wireless Edge Router Release 3.5 Software Configuration Guide, Cisco IOS Release 15.1(3)MR
OL-26895-01
20
Configuring IPv6
The Cisco MWR 2941 routr provides support for a subset of the IPv6 features supported in Cisco IOS
Release 15.1(1)S. The following sections describe the IPv6 features supported on the Cisco MWR 2941.
• Supported IPv6 Features, page 20-1
• Supported IPv6 Commands, page 20-2
• Sample IPv6 Configurations, page 20-4
Supported IPv6 Features
Table 1 summarizes the supported IPv6 features in Release 15.0(1)MR. For information about how to
configure these features, see the hyperlinked section or refer to the IPv6 Configuration Guide, Cisco IOS
Release 15.1S.
Table 1 Supported IPv6 Features
Implementing IPv6 Addressing and Basic Connectivity
Implementing Bidirectional Forwarding Detection for IPv6
Implementing IPv6 Bidirectional Forwarding Detction for IPv6
Border Gateway Protocol Neighbors.
Implementing Multiprotocol BGP for IPv6
Implementing DHCP for IPv6
Implementing IS-IS for IPv6
Implementing IPv6 for Network Management
Implementing IPv6 over MPLS
Implementing IPv6 VPN over MPLS
Implementing OSPF for IPv6
Implementing QoS for IPv6
Implementing Static Routes for IPv6