Specifications

16-21
Cisco MWR 2941 Mobile Wireless Edge Router Release 3.5 Software Configuration Guide, Cisco IOS Release 15.1(3)MR
OL-26895-01
Chapter 16 Configuring Clocking and Timing
Clocking Sample Configurations
ip forward-protocol nd
ip route 0.0.0.0 0.0.0.0 172.18.75.1
ip route 10.1.1.201 255.255.255.255 10.100.11.1
ip route 10.1.1.202 255.255.255.255 10.100.12.1
!
!
ip http server
ip pim rp-address 10.2.1.1 5 override
!
access-list 5 permit 224.0.1.129
snmp-server community public RO 1
snmp-server ifindex persist
snmp-server trap link ietf
no snmp-server sparse-tables
snmp-server queue-limit notification-host 100
snmp-server enable traps snmp linkdown linkup coldstart warmstart
snmp-server enable traps cpu threshold
snmp-server enable traps syslog
snmp-server enable traps ipran
snmp-server host 10.10.10.10 version 2c V2C
!
!
!
mpls ldp router-id Loopback0 force
!
control-plane
!
!
!
!
!
!
line con 0
logging synchronous
no modem enable
line aux 0
line vty 0 4
password mypassword
login
!
exception data-corruption buffer truncate
ntp clock-period 17180198
ntp peer 10.81.254.131
network-clock-select hold-timeout 600
network-clock-select mode nonrevert
network-clock-select 1 PACKET-TIMING
end
PTP Redundancy
The following configurations use PTP with PTP redundancy.
Note This section provides partial configurations intended to demonstrate a specific feature.
MWR_A
!
interface Loopback0
ip address 6.6.6.3 255.255.255.255