Specifications

16-17
Cisco MWR 2941 Mobile Wireless Edge Router Release 3.5 Software Configuration Guide, Cisco IOS Release 15.1(3)MR
OL-26895-01
Chapter 16 Configuring Clocking and Timing
Clocking Sample Configurations
• show platform hardware rtm—Displays the current status of the TOP module
For more information about these commands, see the Cisco MWR 2941 Mobile Wireless Edge Router
IOS Command Reference, Release 15.0(1)MR.
Clocking Sample Configurations
The following sections show a sample configurations for PTP. For more information about how to
configure PTP, see Chapter 16, “Configuring Clocking and Timing.”
• PTP Slave Mode with Redundancy
• PTP Redundancy
• PTP Boundary Clock
• PTP with Multiple VLANs
• PTP Hybrid Mode
• PTP Hot Standby Master Clock
• PTP Input Timing
• PTP Output Timing
PTP Slave Mode with Redundancy
The following configuration implements PTP slave mode and PTP redundancy.
!
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname MWR_2
!
boot-start-marker
boot system flash mwr2941-ipran-mz.ricwest-ptp
boot-end-marker
!
card type e1 0 0
enable secret 5 mysecret
!
no aaa new-model
ip source-route
!
!
ip cef
no ip domain lookup
ip multicast-routing
ptp mode ordinary
ptp priority1 128
ptp priority2 128
ptp domain 0
multilink bundle-name authenticated
!
mpls label protocol ldp
!