Specifications

15-54
Cisco MWR 2941 Mobile Wireless Edge Router Release 3.5 Software Configuration Guide, Cisco IOS Release 15.1(3)MR
OL-26895-01
Chapter 15 Configuring Ethernet OAM, CFM, and E-LMI
Configuring Microwave 1+1 Hot Standby Protocol
Step 4
link-protection group group-number pccm vlan
vlan-id
Specifies a link protection group for ODU 1.
Step 5
interface gigabitethernet slot/port Enters configuration for the interface connected to ODU 2
Step 6
ethernet cfm mep domain domain-name mpid mpid
{port | vlan vlan-id}
Defines a CFM MEP domain for ODU 2.
Step 7
link-protection group group-number pccm vlan
vlan-id
Specifies a link protection group for ODU 2.
Step 8
ethernet cfm domain domain-name level level-id
[direction outward]
Configures the CFM MEP domain for ODU 1.
Step 9
id {mac-address domain-number | dns dns-name |
null}
Example:
Router(config)# id null
Defines a the maintenance domain identifier (MDID) for
ODU 1 as null.
Step 10
service {ma-name | ma-num | vlan-id vlan-id | vpn-id
vpn-id} [port | vlan vlan-id [direction down]]
Defines a maintenance association for ODU 1.
Step 11
continuity-check Enables transmission of continuity check messages
(CCMs) within the ODU 1 maintenance association.
Step 12
continuity-check [interval time | loss-threshold
threshold | static rmep]
Defines a continuity-check interval for the ODU 1
maintenance association.
Step 13
ethernet cfm domain domain-name level level-id
[direction outward]
Configures the CFM MEP domain for ODU 2.
Step 14
id {mac-address domain-number | dns dns-name |
null}
Example:
Router(config)# id null
Defines a the MDID for ODU 2 as null.
Step 15
service {ma-name | ma-num | vlan-id vlan-id | vpn-id
vpn-id} [port | vlan vlan-id [direction down]]
Defines a maintenance association for ODU 2.
Step 16
continuity-check Enables transmission of CCMs within the ODU 2
maintenance association.
Step 17
continuity-check [interval time | loss-threshold
threshold | static rmep]
Defines a continuity-check interval for the ODU 2
maintenance association.
Step 18
link-protection enable Globally enables link protection on the router.
Step 19
link-protection group management vlan vlan-id Defines the management VLAN used for link protection.
Step 20
ethernet cfm ieee Enables the Ethernet Connectivity Fault Management
802.1ag Standard (CFM IEEE) version of CFM.
Step 21
ethernet cfm global Enables Ethernet connectivity fault management (CFM)
globally.
Step 22
end Returns to privileged EXEC mode.
Step 23
copy running-config startup-config (Optional) Saves your entries in the configuration file.
Command Purpose