Specifications

15-12
Cisco MWR 2941 Mobile Wireless Edge Router Release 3.5 Software Configuration Guide, Cisco IOS Release 15.1(3)MR
OL-26895-01
Chapter 15 Configuring Ethernet OAM, CFM, and E-LMI
Configuring Ethernet CFM
Use the no form of each command to remove a configuration or to return to the default settings.
Configuring Static Remote MEP
Beginning in privileged EXEC mode, follow these steps to configure Ethernet CFM static remote MEP:
Step 7
ethernet cfm mep crosscheck {enable | disable}
domain domain-name {vlan {vlan-id | any} | port}
Enable or disable CFM crosscheck for one or more VLANs
or a port MEP in the domain.
• domain domain-name—Specify the name of the
created domain.
• vlan {vlan-id | any}—Enter the service provider
VLAN ID or IDs as a VLAN-ID (1 to 4094), a range of
VLAN-IDs separated by a hyphen, or a series of
VLAN IDs separated by comma. Enter any for any
VLAN.
• port—Identify a port MEP.
Step 8
show ethernet cfm maintenance-points remote
crosscheck
Verify the configuration.
Step 9
show ethernet cfm errors [configuration] Enter this command after you enable CFM crosscheck to
display the results of the crosscheck operation. Enter the
configuration keyword to display the configuration error
list.
Step 10
copy running-config startup-config (Optional) Save your entries in the configuration file.
Command Purpose
Command Purpose
Step 1
configure terminal Enter global configuration mode.
Step 2
ethernet cfm domain domain-name level level-id Define a CFM domain, set the domain level, and enter
ethernet-cfm configuration mode for the domain. The
maintenance level number range is 0 to 7.