Specifications

Index
IN-4
Cisco MWR 2941 Mobile Wireless Edge Router Software Configuration Guide, Release 12.2(33)MRB
OL-21227-02
cell site POP 1-5
example of Cisco MWR 2941-DC router in a cell site
POP (figure)
1-6
port numbering
Cisco MWR 2941-DC router
3-2
provider edge 1-3
pseudowire-class A-59
ptp announce A-61
ptp clock-destination A-64
ptp clock-source A-63
ptp delay-req A-65
ptp master A-69
ptp mode A-70
ptp priority1 A-71
ptp slave A-73
ptp sync A-65, A-74
ptp sync limit A-76
PWE3
example of asymmetric PWE3 configuration
B-2
example of Cisco MWR 2941-DC router in a PWE3
(figure)
1-2
example of PWE3 redundancy configuration B-15
overview 1-2
R
RAN, using the Cisco MWR 2941-DC router 1-1
recovered-clock slave A-78
RNC
in a RAN
1-1
S
SAToP 1-3
saving configuration changes 2-3, 4-45
security 4-46
serial port 4-6
set network-clocks A-80
setup command facility 3-3
show atm cell-packing A-81
show commands for monitoring the Cisco MWR 2941-DC
router
4-48
show controller A-88
show controller rtm A-90
show interface switchport backup A-99
show network-clocks A-107
show platform hardware rtm A-108
show ptp clock A-109
show ptp foreign-master-record A-110
show ptp parent A-111
show ptp port A-112
show ptp time-property A-113
signaling traffic 1-6
slot numbering
Cisco MWR 2941-DC router
3-2
SNMP support
configuring
4-33
software
IOS basics
2-1
verifying version 4-1
speed, setting 4-5
Structure-agnostic TDM over Packet 1-3
Structure-agnostic TDM over Packet (SaToP) 1-3
switchport backup interface A-120
synchronized network operation 4-6
T
transmit clock 4-6
U
undo feature
Cisco IOS
2-2
V
verifying