Specifications

B-540
Cisco MWR 2941 Mobile Wireless Edge Router Software Configuration Guide, Release 12.2(33)MRB
OL-21227-02
Appendix B Cisco MWR 2941 Router Command Reference
show rep topology
show rep topology
Use the show rep topology User EXEC command to display Resilient Ethernet Protocol (REP) topology
information for a segment or for all segments, including the primary and secondary edge ports in the
segment.
show rep topology [segment segment_id] [archive] [detail] [ | {begin | exclude | include}
expression]
Syntax Description
Command Modes User EXEC
Command History
Usage Guidelines The output of this command is also included in the show tech-support privileged EXEC command
output.
Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
are not displayed, but the lines that contain Output are displayed.
segment
segment-id
(Optional) Display REP topology information for the specified segment. The ID
range is from 1 to 1024.
archive (Optional) Display the previous topology of the segment. This keyword can be
useful for troubleshooting a link failure.
detail (Optional) Display detailed REP topology information.
| begin (Optional) Display begins with the line that matches the expression.
| exclude (Optional) Display excludes lines that match the expression.
| include (Optional) Display includes lines that match the specified expression.
expression Expression in the output to use as a reference point.
Release Modification
12.2(40)SE This command was introduced.
12.2(33)MRA This command was integrated into Cisco IOS Release 12.2(33)MRA.