Specifications
B-529
Cisco MWR 2941 Mobile Wireless Edge Router Software Configuration Guide, Release 12.2(33)MRB
OL-21227-02
Appendix B Cisco MWR 2941 Router Command Reference
show policy-map interface
Traffic Policing: Example
The following is sample output from the show policy-map interface command. This sample displays
the statistics for the serial 2/0 interface on which traffic policing has been enabled. The committed
(conform) burst (bc) and excess (peak) burst (be) are specified in milliseconds (ms).
Router# show policy-map interface serial2/0
Serial2/0
Service-policy output: policy1 (1050)
Class-map: class1 (match-all) (1051/1)
0 packets, 0 bytes
5 minute offered rate 0 bps, drop rate 0 bps
Match: ip precedence 0 (1052)
police:
cir 20 % bc 300 ms
cir 409500 bps, bc 15360 bytes
pir 40 % be 400 ms
pir 819000 bps, be 40960 bytes
conformed 0 packets, 0 bytes; actions:
transmit
exceeded 0 packets, 0 bytes; actions:
drop
violated 0 packets, 0 bytes; actions:
drop
conformed 0 bps, exceed 0 bps, violate 0 bps
Class-map: class-default (match-any) (1054/0)
0 packets, 0 bytes
5 minute offered rate 0 bps, drop rate 0 bps
Match: any (1055)
0 packets, 0 bytes
5 minute rate 0 bps
In this example, the CIR and PIR are displayed in bps, and both the committed burst (bc) and excess
burst (be) are displayed in bits.
The CIR, PIR bc, and be are calculated on the basis of the formulas described below.
Packets Delayed Total number of packets delayed in the queue of the traffic shaper before
being transmitted.
Bytes Delayed Total number of bytes delayed in the queue of the traffic shaper before
being transmitted.
Shaping Active Indicates whether the traffic shaper is active. For example, if a traffic
shaper is active, and the traffic being sent exceeds the traffic shaping rate,
a “yes” appears in this field.
1. A number in parentheses may appear next to the service-policy output name, class-map name, and match criteria
information. The number is for Cisco internal use only and can be disregarded.
Table 50 show policy-map interface Field Descriptions—Configured for Percentage-Based Policing
and Shaping (with Traffic Shaping Enabled)
1
(continued)
Field Description