Specifications

B-520
Cisco MWR 2941 Mobile Wireless Edge Router Software Configuration Guide, Release 12.2(33)MRB
OL-21227-02
Appendix B Cisco MWR 2941 Router Command Reference
show policy-map interface
• Traffic Shaping on Serial Interface: Example, page B-520
• Two-Rate Traffic Policing: Example, page B-523
• Multiple Traffic Policing Actions: Example, page B-524
• Percentage-Based Policing and Shaping: Example, page B-526
• Traffic Shaping: Example, page B-527
• Traffic Policing: Example, page B-529
Traffic Shaping on Serial Interface: Example
The following sample output from the show policy-map interface command displays the statistics for
the serial 3/2 interface, to which a service policy called p1 (configured as shown below) is attached.
Traffic shaping has been enabled on this interface. See Table 46 for an explanation of the significant
fields that commonly appear in the command output.
policy-map p1
class c1
shape average 320000
Router# show policy-map interface serial3/2 output
Serial3/2
Service-policy output: p1
Class-map: c1 (match-all)
0 packets, 0 bytes
5 minute offered rate 0 bps, drop rate 0 bps
Match: ip precedence 0
Traffic Shaping
Target Byte Sustain Excess Interval Increment Adapt
Rate Limit bits/int bits/int (ms) (bytes) Active
320000 2000 8000 8000 25 1000 -
Queue Packets Bytes Packets Bytes Shaping
Depth Delayed Delayed Active
0 0 0 0 0 no