Specifications

B-518
Cisco MWR 2941 Mobile Wireless Edge Router Software Configuration Guide, Release 12.2(33)MRB
OL-21227-02
Appendix B Cisco MWR 2941 Router Command Reference
show policy-map interface
12.0(28)S This command was modified for the QoS: Percentage-Based Policing feature
to include milliseconds when calculating the committed (conform) burst (bc)
and excess (peak) burst (be) sizes.
12.1(1)E This command was integrated into Cisco IOS Release 12.1(1)E.
12.1(2)T This command was modified to display information about the policy for all
Frame Relay PVCs on the interface or, if a DLCI is specified, the policy for
that specific PVC. This command was also modified to display the total
number of packets marked by the quality of service (QoS) set action.
12.1(3)T This command was modified to display per-class accounting statistics.
12.2(4)T This command was modified for two-rate traffic policing and can display
burst parameters and associated actions.
12.2(8)T The command was modified for the Policer Enhancement—Multiple
Actions feature and the WRED—Explicit Congestion Notification (ECN)
feature.
For the Policer Enhancement—Multiple Actions feature, the command was
modified to display the multiple actions configured for packets conforming
to, exceeding, or violating a specific rate.
For the WRED—Explicit Congestion Notification (ECN) feature, the
command displays ECN marking information.