Specifications
B-483
Cisco MWR 2941 Mobile Wireless Edge Router Software Configuration Guide, Release 12.2(33)MRB
OL-21227-02
Appendix B Cisco MWR 2941 Router Command Reference
show ethernet oam statistics
show ethernet oam statistics
To display detailed information about Ethernet operations, maintenance, and administration (OAM)
packets, use the show ethernet oam statistics command in privileged EXEC mode.
show ethernet oam statistics [interface type number]
Syntax Description
Command Modes Privileged EXEC (#)
Command History
Usage Guidelines Statistics that this command displays include the following:
• Rx/Tx OAM Protocol Data Unit (PDU) counters
• Link monitoring events, including event logs, if available
• Remote fault detection events
• Remote loopback events
Examples The following example shows output from a show ethernet oam statistics command for interface
GigabitEthernet 6/11:
Router# show ethernet oam statistics interface gigabitethernet 6/11
GigabitEthernet6/11
Counters:
---------
Information OAMPDU Tx : 9723
Information OAMPDU Rx : 9712
Unique Event Notification OAMPDU Tx : 0
Unique Event Notification OAMPDU Rx : 0
Duplicate Event Notification OAMPDU TX : 0
Duplicate Event Notification OAMPDU RX : 0
Loopback Control OAMPDU Tx : 0
Loopback Control OAMPDU Rx : 0
Variable Request OAMPDU Tx : 0
Variable Request OAMPDU Rx : 0
Variable Response OAMPDU Tx : 0
interface (Optional) Specifies an interface.
type (Optional) Type of Ethernet interface. Valid values are: FastEthernet,
GigabitEthernet, TenGigabitEthernet.
number (Optional) Integer from 1 to 9 that is the number of the Ethernet interface.
Release Modification
12.2(33)SRA This command was introduced.
12.4(15)T This command was integrated into Cisco IOS Release 12.4(15)T.
12.2(33)SXH This command was integrated into Cisco IOS Release 12.2(33)SXH.
12.2(33)MRA This command was integrated into Cisco IOS Release 12.2(33)MRA.