Specifications

B-478
Cisco MWR 2941 Mobile Wireless Edge Router Software Configuration Guide, Release 12.2(33)MRB
OL-21227-02
Appendix B Cisco MWR 2941 Router Command Reference
show ethernet lmi
The following sample output is generated from the show ethernet lmi command using the uni map
keyword:
Router# show ethernet lmi uni map
UNI Id EVC Id Port
--------------------------------- --------------------------------- ------------
uni_sandiego EVC_MP2MP_101 Gi0/1
Status Timeouts Number of times that a status request has been sent but not
received.
Invalid Sequence Number Number of times the sequence numbers of Ethernet LMI
packets do not match the sequence numbers expected.
Invalid Status Response Number of times a status response received was invalid and
discarded.
Unsolicited Status Received Number of times status was received that had not been
requested.
Protocol Errors
Invalid Protocol Version Number of times the protocol version in Ethernet LMI
packets does not match what is supported.
Invalid EVC Reference Id Number of times EVC reference IDs are invalid in Ethernet
LMI packets.
Invalid Message Type Number of message types that are not valid for LMI.
Out of Sequence IE Number of information elements (IEs) that are not in the
correct sequence.
Duplicated IE Number of duplicated IEs.
Mandatory IE Missing Number of mandatory IEs that are missing.
Invalid Mandatory IE Number of mandatory IEs that are invalid.
Invalid non-Mandatory IE Number of non-mandatory IEs that are invalid.
Unrecognized IE Number of IEs that are not recognized.
Unexpected IE Number of IEs that are unexpected.
Short Message Number of times the Ethernet LMI message received is
shorter than supported packets.
Last Full Status Enq Sent Time in hours, minutes, and seconds when the CE sent the
last full LMI status request.
Last Full Status Rcvd Time in hours, minutes, and seconds when the CE received
the last full LMI status report.
Last Status Check Sent Time in hours, minutes, and seconds when the CE sent the
last LMI status request.
Last Status Check Rcvd Time in hours, minutes, and seconds when the CE received
the last LMI status report.
Last clearing of counters Time in hours, minutes, and seconds when the clear ethernet
lmi statistics command was issued for the interface.
Table 31 show ethernet lmi statistics Field Descriptions (continued)
Field Description