Specifications

B-477
Cisco MWR 2941 Mobile Wireless Edge Router Software Configuration Guide, Release 12.2(33)MRB
OL-21227-02
Appendix B Cisco MWR 2941 Router Command Reference
show ethernet lmi
The following sample output is generated from the show ethernet lmi command using the statistics and
interface keywords:
Router# show ethernet lmi statistics interface Ethernet0/0
E-LMI Statistics for interface Ethernet0/0
Ether LMI Link Status: Up
UNI Status: Up
UNI Id: router3-e0/0+router-e0/0
Reliability Errors:
Status Timeouts 0 Invalid Sequence Number 0
Invalid Status Response 0 Unsolicited Status Received 0
Protocol Errors:
Invalid Protocol Version 0 Invalid EVC Reference Id 0
Invalid Message Type 0 Out of Sequence IE 0
Duplicated IE 0 Mandatory IE Missing 0
Invalid Mandatory IE 0 Invalid non-Mandatory IE 0
Unrecognized IE 0 Unexpected IE 0
Short Message 0
Last Full Status Enq Sent 00:50:35 Last Full Status Rcvd 00:50:35
Last Status Check Sent 00:00:06 Last Status Check Rcvd 00:00:06
Last clearing of counters 00:09:57
Note The UNI Id field displays only when it is available from the provider edge router.
Table 31 describes the significant fields shown in output of the show ethernet lmi command using the
statistics keyword.
Table 30 show ethernet lmi parameters Field Descriptions
Field Description
Version Version number of the specification that E-LMI
implementation is based on.
Mode Customer equipment or the Metro Ethernet network.
T391 Polling timer.
T392 Polling verification timer.
N391 Polling counter.
N393 Event counter.
Table 31 show ethernet lmi statistics Field Descriptions
Field Description
E-LMI Statistics for interface <interface-id>
Ether LMI Link Status Operational state of Ethernet LMI connectivity.
UNI Status Operational state of the UNI.
UNI Id Identifier of the UNI.
Reliability Errors