Specifications

B-476
Cisco MWR 2941 Mobile Wireless Edge Router Software Configuration Guide, Release 12.2(33)MRB
OL-21227-02
Appendix B Cisco MWR 2941 Router Command Reference
show ethernet lmi
The following sample output is generated from the show ethernet lmi command using the map
interface keyword:
Router# show ethernet lmi evc map interface Ethernet0/0
UNI Id: router3-e0/0+router-e0/0
St Evc Id CE-VLAN
--- ---------------------------------------- ----------------------------------
A EVC_MP2MP_101 101
A EVC_P2P_110 110
Key: St=Status, A=Active, P=Partially Active, I=Inactive, *=Default EVC,
?=Link Down
Table 29 describes the significant fields shown in output of the show ethernet lmi command using the
evc and map keywords.
The following sample output is generated from the show ethernet lmi command using the parameters
and interface keywords:
Router# show ethernet lmi parameters interface Ethernet0/0
E-LMI Parameters for interface Ethernet0/0
Version : MEF.16-0106
Mode : CE
T391 : 10
T392 : NA
N391 : 360
N393 : 4
Table 30 describes the significant fields shown in output of the show ethernet lmi command using the
parameters keyword.
Remote UNI Count Number of remote UNIs that are configured and the number
that are operational.
Port Type of port, either local or remote, on which the EVC is
configured. If the port is local, the interface ID is specified.
Table 28 show ethernet lmi evc detail Field Descriptions (continued)
Field Description
Table 29 show ethernet lmi evc map Field Descriptions
Field Description
UNI Id Identifier of the UNI between the CE and PE devices.
St Operational state of the EVC.
Evc Id Identifier of the EVC.
CE-VLAN Identifier of the VLAN used by the CE.