Specifications

B-475
Cisco MWR 2941 Mobile Wireless Edge Router Software Configuration Guide, Release 12.2(33)MRB
OL-21227-02
Appendix B Cisco MWR 2941 Router Command Reference
show ethernet lmi
Examples The following examples show output from a show ethernet lmi command for interface Ethernet 0/0
using different keywords and arguments.
The following sample output is generated from the show ethernet lmi command using the evc keyword:
Router# show ethernet lmi evc
St EVC Id Port
--- ------------------------------------------------------------ --------------
A EVC_MP2MP_101 Gi0/1
A EVC_P2P_110 Gi0/1
Key: St=Status, A=Active, P=Partially Active, I=Inactive, ?=Link Down
The following sample output is generated from the show ethernet lmi command using the evc and
optional detail keywords:
Router# show ethernet lmi evc detail EVC_MP2MP_101
EVC Id: EVC_MP2MP_101
interface Ethernet0/0
Time since Last Full Report: 00:25:25
Ether LMI Link Status: Up
UNI Status: Up
UNI Id: router3-e0/0+router-e0/0
CE-VLAN/EVC Map Type: Bundling
VLAN: 101
EVC Status: Active
EVC Type: Multipoint-to-Multipoint
Remote UNI Count: Configured = 2, Active = 2
UNI Id UNI Status Port
------ ---------- ----
router4-e0/0+router1-e0/0 Up Remote
router5-e0/0+router6-e0/0 Up Remote
Table 28 describes the significant fields shown in output of the show ethernet lmi command using the
evc and detail keywords.
Table 28 show ethernet lmi evc detail Field Descriptions
Field Description
EVC Id Identifier of the EVC.
Time since Last Full Report Number of hours, minutes, seconds since the CE requested a
detailed report.
Ether LMI Link Status Operational state of the LMI link.
UNI Status Operational state of the UNI.
UNI Id Identifier of the UNI between the CE and PE devices.
CE-VLAN/EVC Map Type EVC map type: bundling, multiplex, or all-to-one
VLAN Identifier of the VLAN.
EVC Status Operational state of the EVC.
EVC Type Type of connection (point-to-point or
multipoint-to-multipoint).